X10
Sound Clips by Bo Ramsey using a Stock 63' ES335 and 69' Strat
The X10 is the younger sibling of Ms Sadie. Pure early 60's Tone that responds to your touch just like a XITS Amp should.
This design is a single channel 15-Watt Combo with three 12AX7 driven gain stages and a EL84 power section. This X10’s tones range from chimey clean to fully saturated drive. The master-volume allows both pre and power amp gain and levels to be blended allowing unlimited tone and loudness combinations
X10 TUBE CONFIGURATION
V1 ECC83/12AX7 First & Second Gain Stage
V2 ECC83/12AX7 Third Gain Stage
V3 ECC83/12AX7 Phase Inverter
V4-5 EL84 Power Section – Matched Pair
V1 ECC83/12AX7 First & Second Gain Stage
V2 ECC83/12AX7 Third Gain Stage
V3 ECC83/12AX7 Phase Inverter
V4-5 EL84 Power Section – Matched Pair
USER CONTROLS
Volume 1 / Treble / Bass / Volume 2 (Post Phase Inverter Master Volume), Bright Switch
MAINS
CONTROL SWITCH (Three Position Center Off)
ON - SKILL (UP - LAURAL WREITH)
STANDBY - DOWN
OFF – CENTER POSITION
ON - SKILL (UP - LAURAL WREITH)
STANDBY - DOWN
OFF – CENTER POSITION
The standard mains configuration is for 120 VAC – 60Hz. All XITS products can be set up for international voltages.
CABINET
The X10 Cabinet has been designed to provide a big sound in a small package. Cabinet Dimensions are 17-0” x 17.0” x 10-1/2”. The back opening has been sized and positioned to allow the perfect blend of sound from both the front and back of the loudspeaker. The cabinet is constructed out of ½” European Baltic Birch Plywood with a floating baffle so the cabinet resonates and comes to life as the amplifiers volume is increased.
The X10 Cabinet has been designed to provide a big sound in a small package. Cabinet Dimensions are 17-0” x 17.0” x 10-1/2”. The back opening has been sized and positioned to allow the perfect blend of sound from both the front and back of the loudspeaker. The cabinet is constructed out of ½” European Baltic Birch Plywood with a floating baffle so the cabinet resonates and comes to life as the amplifiers volume is increased.
Woven Vinyl is “welded” to the cabinet shell to provide unmatched scuff and abrasion resistance. Welding the Woven Vinyl to the cabinet
CONFIGURATIONS
1 X 12 Combo with Celestion Greenback $1589
1 X 12 Combo with Celestion Greenback $1589
1 X 12 Combo with Celestion Alnico Blue $1789
Head Version of the X10 $1489
1 X 12 XCAB TV (Extension Cabinet) with Celestion Greenback $538